do not scale from this print bcs-1xx-xxx-x-xx-xxx no of positions -01 thru -50 body specification -s: single row (see table 1) -d: double row (see table 1) plating specifications (see table 1) polarizing option insert pk-06-n into specified pos and break off tab (not available for -be option) entry specification -de: dual entry (see table 1) -te: top entry (see table 1) -he: horizontal entry (see table 1) -pe: pass-through entry (see table 1) -de-be: (see table 1) -pe-be: (see table 1) -t: matte tin contact and tail -l: 10" light selective gold in contact area, matte tin on tail -f: 3" flash selective gold contact area, matte tin on tail -s: 30" selective gold in contact area, matte tin on tail -h: 30" heavy gold in contact area, 3" gold on tail -sm: 30" selective gold in contact area, matte tin on tail -tm: matte tin contact and tail -lm: 10" light selective gold in contact area, matte tin on tail -fm: 3" flash selective gold in contact area, matte tin on tail -ltl: 10? light selective gold in contact area, tin lead (90/10 +/-5%) on tail .119 3.02 (see note 9) 2 max sway in either direction -de/-de-be fig 1 (cut to position: .010[.25] - see note 4) no. of positions x .100[2.54] (mold to position: ) .100 ref 2.54 (no. of pos x .100[2.54]) - (.100[2.54]) .050 ref 1.27 "b" "b" 1st position -01 -02 -50 -49 +.000[0.00] -.005[0.13] (-de tail orientation) (-he tail orientation) .200 ref 5.08 .100 ref 2.54 "a" "a" -49 -50 -02 -01 .290 7.37 ref .16 4.1 2 max toe section "a"-"a" contact #49 bcs-1xx-x-d-de contact #50 .06 1.6 2 max toe section "b"-"b" contact #2 bcs-1xx-x-s-de contact #1 c (-te tail orientation) (-pe tail orientation) sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: box connector socket strip by: bcs-1xx-xxx-x-xx-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing kolb 09/12/1991 3 1 sheet scale: 2:1 insulator: glass filled lcp ul 94 vo, color: black contact: phos. bronze f:\dwg\misc\mktg\bcs-1xx-xxx-x-xx-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 notes: 1. represents critical dim. for statistical process control. 2. pushout force to be: 1 lb. min. 3. [ ] dimensions are in millimeters. 4. min wall thickness on cut parts: .009 [.23]. 5. cut parts to be symmetrical about c l . 6. 1st position will always point up on top view as shown. 7. 1 through 4 positions are to be layer packaged, 5 through 50 positions are to be tubed for all entry specifcation except bcs-s-he.for bcs-s-he, 1 through 3 positions are to be layer packaged, 4 through 50 positions are to be tubed. 8. damage to the cut surface can not effect lead-in of the cores. 9. max variation within a row: .006 [.15] max variation from row to row: .012 [.30] revision bv
.210 5.33 ref (no. of pos x .100[2.54]).008[0.20] .225 5.72 ref (no. of pos x .100[2.54]) - .100[2.54] .050 ref 1.27 .100 ref 2.54 2 max sway in either direction "d" "d" 01 50 bcs-1xx-x-d-he .320 8.13 ref 2 max sway (either direction) 2 max sway (either direction) 02 49 .110 ref 2.79 .125 ref 3.18 2 max sway in either direction "c" "c" -01 -50 .320 8.13 ref .143 3.63 .147 3.73 in-process -s-he .150 3.81 .250 - .003 + .005 6.35 - 0.076 + 0.127 contact #2 contact #1 in-process -d-he .290 7.37 ref .122 3.10 contact #1 .122 3.10 .10 2.6 contact #1 bcs-1xx-x-s-te bcs-1xx-xxx-d-te fig 4 -pe/-pe-be (see sheet 3 for in-process) .293 ref 7.44 .30 7.6 .128 .010 3.25 0.254 contact #1 .128 .010 3.25 0.254 .20 5.1 contact #1 .015 ref 0.38 .31 7.9 .125 - .015 + .010 3.18 - 0.381 + 0.254 2 max toe (either direction) section "c"-"c" contact # 2 .310 7.88 .310 - .010 + .015 7.87 - 0.254 + 0.381 .125 - .015 + .010 3.16 - 0.381 + 0.254 .015 ref 0.38 .0700 ref 1.779 2 max toe (either direction) section "d"-"d" contact #49 contact #50 fig 2 -he fig 3 -te bcs-1xx-xxx-d-pe bcs-1xx-x-s-pe bcs-1xx-x-s-he sheet of box connector socket strip by: bcs-1xx-xxx-x-xx-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing kolb 09/12/1991 3 2 sheet scale: 2:1 revision bv f:\dwg\misc\mktg\bcs-1xx-xxx-x-xx-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
.176 4.47 in-process 1 .176 4.47 in-process 1 -01 (see note 6) -02 -50 -49 -s-pe-be: (same as -s-pe except as shown) -d-pe-be: (same as -d-pe) pt-1-24-01-15 bcs-d-pe bcs-d-pe bcs-d-pe-be bcs-d-pe-de-be bcs-s-de bcs-s-de-be pt-3-24-01-01 pt-1-24-04-38 bcs-s-he (see note 7) pt-1-24-03-29 bcs-d-he pt-1-24-01-22 bcs-d-te pt-1-24-01-24 bcs-s-te .544 ref 13.83 in-process 2 .445 ref 11.31 in-process 2 -01 -02 -50 -49 -01 -02 -50 -49 -s-be: (same as fig 1 except as shown -d-be: (same as fig 1) -49 -50 -01 -02 pt-1-24-20-09 bcs-s-pe bcs-s-pe-be in-process bcs-1xx-x-d-pe (same for -be) in-process bcs-1xx-x-s-pe (same for -be) sheet of box connector socket strip by: bcs-1xx-xxx-x-xx-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing kolb 09/12/1991 3 3 sheet scale: 2:1 revision bv f:\dwg\misc\mktg\bcs-1xx-xxx-x-xx-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
|
